U5DL2C48A(TE24R,Q;中文规格书,Datasheet资料

TOSHIBA HighEfficiencyDiodeStack (HED) Silicon Epitaxial Type

5DL2C48A, 5FL2C48A, U5DL2C48A, U5FL2C48A

Switching Mode Power Supply Application

Converter & Chopper Application

• Repetitive peak reverse voltage: VDRM = 200 V, 300 V • Average output rectified current: IO = 5 A • Ultra fast reverse-recovery time: trr = 35 ns (Max) • Low switching losses and output noise

Unit: mm

5DL2C48A, 5FL2C48A

Absolute Maximum Ratings (Ta = 25°C)

Characteristics Symbol Rating Unit 5DL2C48A

Repetitive peak

Repetitive voltage

U5DL2C48A 5FL2C48A U5FL2C48A

Average output rectified current Peak one cycle surge forward current Junction temperature Storage temperature range

IO IFSM Tj Tstg VRRM

300

5 A 25 (50 Hz) 27.5 (60 Hz)

A

200

V

JEDEC JEITA

― ―

−40~150 °C −40~150 °C TOSHIBA 12-10D1A

Note: Using continuously under heavy loads (e.g. the application of high

temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual

reliability data (i.e. reliability test report and estimated failure rate, etc).

U5DL2C48A, U5FL2C48A

Polarity

③

① ②

JEDEC JEITA

― ―

TOSHIBA 12-10D2A

1

http://oneic.com/

2006-11-08

3±0.2 5DL2C48A,5FL2C48A,U5DL2C48A,U5FL2C48A Electrical Characteristics (Ta = 25°C)

Characteristics Symbol 5DL2C48A

Peak forward voltage

U5DL2C48A 5FL2C48A U5FL2C48A

Repetitive peak reverse current Reverse recovery time Forward recovery time Thermal resistance

IRRM trr tfr Rth (j-c)

VRRM = Rated

IF = 2 A, di/dt = −20 A/μs IF = 1 A

Total DC , junction to case

VFM

IFM = 2.5 A

⎯ 1.3 ⎯ 10 μA ⎯ 35 ns 100ns Test Condition Typ. MaxUnit

⎯ 0.98V

⎯ 3.5 °C/W

VFM, IRRM, trr, tfr: A Value applied to one cell.

Marking

Abbreviation Code

Part No.

5DL2C 5DL2C48A 5DL2C Part No. (or abbreviation code)Lot No. A line indicates

lead (Pb)-free package or lead (Pb)-free finish.

5DL2C U5DL2C48A 5FL2C 5FL2C48A 5FL2C U5FL2C48A Characteristics indicator

Handling Precaution

The absolute maximum ratings denote the absolute maximum ratings, which are rated values and must not be exceeded during operation, even for an instant. The following are the general derating methods that we recommend when you design a circuit with a device.

VRRM: We recommend that the worst case voltage, including surge voltage, be no greater than 80% of the

absolute maximum rating of VRRM for a DC circuit and be no greater than 50% of that of VRRM for an AC circuit. VRRM has a temperature coefficient of 0.1%/°C. Take this temperature coefficient into account designing a device at low temperature. IO:

We recommend that the worst case current be no greater than 80% of the absolute maximum rating of IO. Carry out adequate heat design. If you can’t design a circuit with excellent heat radiation, set the margin by using an allowable Tamax-IO curve.

This rating specifies the non-repetitive peak current in one cycle of a 50-Hz sine wave, condition angle 180. Therefore, this is only applied for an abnormal operation, which seldom occurs during the lifespan of the device. We recommend that a device be used at a Tj of below 120°C under the worst load and heat radiation conditions. Please refer to the Rectifiers databook for further information.

2

http://oneic.com/

2006-11-08

5DL2C48A,5FL2C48A,U5DL2C48A,U5FL2C48A

iF – vF

50 30 U5DL2C48A iF – vF

50 Instantaneous forward current iF (A) Instantaneous forward current iF (A) 5DL2C48A 305FL2C48A U5FL2C48A10 5 3 1053 1 0.5 0.3 25°C 25 10.50.3One cell One cell 0.1 0.10.4 1.8 0.6 0.8 1.0 1.2 1.4 1.6 0.4 1.8 0.6 0.8 1.0 1.2 1.4 1.6 Instantaneous forward voltage VF (V) Instantaneous forward voltage VF (V)

5 5DL2C48A U5DL2C48A 4 60°3 120° 90°

PF (AV) – IO

180° 75FL2C48A

PF (AV) – IO

180° 120° 90° U5FL2C48A Average forward power dissipation PF (AV) (W) Average forward power dissipation PF (AV) (W) 6560°4320° α 360° 100 Conduction angle (One cell) 1 2 3 4 5 6 α = 30°Rectangular waveform α = 30° 2 Rectangular waveform 1 0° α 360° Conduction angle (One cell) 0 0 1 2 3 4 5 6 Average output rectified current IO (A) Average output rectified current IO (A)

Tc max– IO

160 5DL2C48A 140 120 100 80 60 0° α 360° 40 Conduction angle (One cell) 1 2 3 4 5 6 120° 180°U5DL2C48A 160

Tc max – IO

5FL2C48A Maximum allowable case temperature Ta max (°C) Maximum allowable case temperature Ta max (°C) 14012010080600°α360°40Conduction angle (One cell) 1 U5FL2C48A Rectangular waveform Rectangular waveform 20 0 200 2 3 4 5 6 Average output rectified current IO (A) Average output rectified current IO (A)

3

http://oneic.com/

2006-11-08

α = 30° 60° 90° α = 30°60°90° 120° 180° Tj = 150°C Tj = 150°C5DL2C48A,5FL2C48A,U5DL2C48A,U5FL2C48A

rth (j-c) – t

100 30Surge forward current

(non-repetitive)

Peak surge forward current IFSM (A) Tj = 25°C Single phase Full sine wave (One cell) Transient thermal impedance rth (j-a) (°C/W) 30 10 25203 15 1 1060 Hz f = 50 Hz 0.3 One cell 0.1 1 10 100 1000 5Time t (ms)

01 100 3 50 5 10 30 Number of cycles at 50 Hz and 60 Hz

100 Cj – VR (Typ.)

f = 1 MHz Ta = 25°C One cell 5DL2C48A, U5DL2C48AJunction capacitance Cj (pF) 50 30 10 5 1 1

3 5 10 30030 50 100

Reverse voltage VR (V)

5FL2C48A, U5FL2C48A 4

http://oneic.com/

2006-11-08

5DL2C48A,5FL2C48A,U5DL2C48A,U5FL2C48A

RESTRICTIONS ON PRODUCT USE

• The information contained herein is subject to change without notice.

20070701-EN

• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property.

In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.

5

http://oneic.com/

2006-11-08

分销商库存信息:

TOSHIBA

U5DL2C48A(TE24R,Q