SNJ54ABT827JT资料

SCBS159E − JANUARY 1991 − REVISED APRIL 2005SN54ABT827, SN74ABT82710ĆBIT BUFFERS/DRIVERSWITH 3ĆSTATE OUTPUTSDState-of-the-Art EPIC-ΙΙB BiCMOS DesignDDDDDDSignificantly Reduces Power DissipationFlow-Through Architecture Optimizes PCBLayoutLatch-Up Performance Exceeds 500 mA PerJEDEC Standard JESD-17Typical VOLP (Output Ground Bounce) < 1 Vat VCC = 5 V, TA = 25°CHigh-Impedance State During Power Upand Power DownHigh-Drive Outputs (−32-mA IOH, 64-mA IOL)Package Options Include PlasticSmall-Outline (DW), Shrink Small-Outline(DB), and Thin Shrink Small-Outline (PW)Packages, Ceramic Chip Carriers (FK), andPlastic (NT) and Ceramic (JT) DIPsSN54ABT827...JT PACKAGESN74ABT827...DB, DW, NT, OR PW PACKAGE(TOP VIEW)OE1A1A2A3A4A5A6A7A8A9A10GND123456789101112242322212019181716151413VCCY1Y2Y3Y4Y5Y6Y7Y8Y9Y10OE2descriptionThese 10-bit buffers or bus drivers provide ahigh-performance bus interface for wide datapaths or buses carrying parity.The 3-state control gate is a 2-input AND gate withactive-low inputs so that, if either output-enable(OE1 or OE2) input is high, all ten outputs are inthe high-impedance state. The ’ABT827 providestrue data at the outputs.When VCC is between 0 and 2.1 V, the deviceis in the high-impedance state during power upor power down. However, to ensurethe high-impedance state above 2.1 V, OE shouldbe tied to VCC through a pullup resistor; theminimum value of the resistor is determined bythe current-sinking capability of the driver. SN54ABT827...FK PACKAGE(TOP VIEW)A3A4A5NCA6A7A8A2A1OE1NCVCCY1Y256789104321282726252423222120111912131415161718Y3Y4Y5NCY6Y7Y8 NC − No internal connectionThe SN54ABT827 is characterized for operation over the full military temperature range of −55°C to 125°C. TheSN74ABT827 is characterized for operation from −40°C to 85°C.FUNCTION TABLEINPUTSOE1LLHXOE2LLXHALHXXOUTPUTYLHZZPlease be aware that an important notice concerning availability, standard warranty, and use in critical applications ofTexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.EPIC-ΙΙB is a trademark of Texas Instruments.PRODUCTION DATA information is current as of publication date.Products conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily includetesting of all parameters.POST OFFICE BOX 655303 DALLAS, TEXAS 75265•A9A10GNDNCOE2Y10Y9Copyright  2005, Texas Instruments Incorporated1元器件交易网www.cecb2b.com

SCBS159E − JANUARY 1991 − REVISED APRIL 2005SN54ABT827, SN74ABT82710ĆBIT BUFFERS/DRIVERSWITH 3ĆSTATE OUTPUTSlogic symbol†OE1OE2113&ENlogic diagram (positive logic)OE1OE2113A1A2A3A4A5A6A7A8A9A10234567891011123222120191817161514A1Y1Y2Y3Y4Y5Y6Y7Y8Y9Y10223Y1To Nine Other Channels†This symbol is in accordance with ANSI/IEEE Std 91-1984 andIEC Publication 617-12.Pin numbers shown are for the DB, DW, JT, NT, and PW packages.absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 VInput voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 VVoltage range applied to any output in the high or power-off state, VO . . . . . . . . . . . . . . . . . . . −0.5 V to 5.5 VCurrent into any output in the low state, IO:SN54ABT827 96 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mASN74ABT827 128 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mAInput clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −18 mAOutput clamp current, IOK (VO < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −50 mAPackage thermal impedance, θJA (see Note 2):DB package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104°C/WDW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81°C/WNT package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67°C/WPW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120°C/WStorage temperature range, Tstg −65. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . °C to 150°C‡Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, andfunctional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is notimplied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.NOTES:1.The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.2.The package thermal impedance is calculated in accordance with EIA/JEDEC Std JESD51, except for through-hole packages,which use a trace length of zero.2POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com

SCBS159E − JANUARY 1991 − REVISED APRIL 2005SN54ABT827, SN74ABT82710ĆBIT BUFFERS/DRIVERSWITH 3ĆSTATE OUTPUTSSN74ABT827MIN4.520.80VCC−24485200−55125200−408500.8VCC−32645MAX5.5recommended operating conditions (see Note 3)SN54ABT827MINVCCVIHVILVIIOHIOL∆t/∆v∆t/∆VCCSupply voltageHigh-level input voltageLow-level input voltageInput voltageHigh-level output currentLow-level output currentInput transition rise or fall ratePower-up ramp rate4.52MAX5.5UNITVVVVmAmAns/Vµs/V°CTAOperating free-air temperatureNOTE 3:Unused inputs must be held high or low to prevent them from floating.POST OFFICE BOX 655303 DALLAS, TEXAS 75265•3元器件交易网www.cecb2b.com

SCBS159E − JANUARY 1991 − REVISED APRIL 2005SN54ABT827, SN74ABT82710ĆBIT BUFFERS/DRIVERSWITH 3ĆSTATE OUTPUTSelectrical characteristics over recommended operating free-air temperature range (unlessotherwise noted)PARAMETERVIKVCC = 4.5 V,VCC = 4.5 V,VCC = 5 V,VCC = 4.5 VVOLVhysIIIOZPU‡IOZPD‡IOZHIOZLIoffICEXIO¶ICCVCC = 4.5 VTEST CONDITIONSII = −18 mAIOH = −3 mAIOH = −3 mAIOH = −24 mAIOH = −32 mAIOL = 48 mAIOL = 64 mA100VCC = 0 to 5.5 V,VI = VCC or GNDVCC = 0 to 2.1 V, VO = 0.5 V to 2.7 V, OE = XVCC = 2.1 V to 0, VO = 0.5 V to 2.7 V, OE = XVCC = 2.1 V to 5.5 V, VO = 2.7 V, OE ≥ 2 VVCC = 2.1 V to 5.5 V, VO = 0.5 V, OE ≥ 2 VVCC = 0,VI or VO ≤ 5.5 VVCC = 5.5 V, VO = 5.5 VVCC = 5.5 V,VCC = 5.5 V, IO = 0,VI = VCC or GNDVCC = 5.5 V,One input at 3.4 V,Other inputs at VCC or GNDVI = 2.5 V or 0.5 VVO = 2.5 V or 0.5 VOutputs highVO = 2.5 VOutputs highOutputs lowOutputs disabledOutputs enabledOutputs disabledControl inputs48−50−140803580±1±50±5010§−10§±10050−225§25040§2501.5501.5−5050−225§25040§2501.5501.5−50±1±10±1010−10±1±50±5010§−10§±10050−225§25040§2501.5501.5TA = 25°CMINTYP†MAX−1.22.5322*0.550.55*0.550.552.5322VmVµAµAµAµAµAµAµAmAµAmAµAmAµAmApFpFSN54ABT827MINMAX−1.22.53VSN74ABT827MINMAX−1.2UNITVVOH∆ICC#CiCo* On products compliant to MIL-PRF-38535, this parameter does not apply.†All typical values are at VCC = 5 V.‡This parameter is characterized, but not production tested.§This data sheet limit may vary among suppliers.¶Not more than one output should be tested at a time, and the duration of the test should not exceed one second.#This is the increase in supply current for each input that is at the specified TTL voltage level, rather than VCC or GND.switching characteristics over recommended ranges of supply voltage and operating free-airtemperature, CL = 50 pF (unless otherwise noted) (see Figure 1)PARAMETERtPLHtPHLtPZHtPZLtPHZtPLZFROM(INPUT)AOEOETO(OUTPUT)YYYVCC = 5 V,TA = 25°CMIN1.11.11§1§21.3§TYP2.62.33.23.34.94.2MAX4.44.15.15.96.36.6SN54ABT827MIN1.11.11121.3MAX4.94.867.177.9SN74ABT827MIN1.11.11§1§21.3§MAX4.84.75.96.96.86.9nsnsnsUNIT§This data sheet limit may vary among suppliers.4POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com

SCBS159E − JANUARY 1991 − REVISED APRIL 2005SN54ABT827, SN74ABT82710ĆBIT BUFFERS/DRIVERSWITH 3ĆSTATE OUTPUTSPARAMETER MEASUREMENT INFORMATION500 ΩS17 VOpenGND500 ΩTESTtPLH/tPHLtPLZ/tPZLtPHZ/tPZHS1Open7 VOpenFrom Output Under TestCL = 50 pF(see Note A)LOAD CIRCUITtw3 VInput1.5 V1.5 V0 VVOLTAGE WAVEFORMSPULSE DURATION3 VInputtPLHOutputtPHLOutput1.5 V1.5 V1.5 V1.5 V0 VtPHL1.5 VtPLHVOH1.5 VVOLVOLTAGE WAVEFORMSPROPAGATION DELAY TIMESINVERTING AND NONINVERTING OUTPUTSVOHVOL3 VTiming Input1.5 V0 VtsuData Input1.5 VVOLTAGE WAVEFORMSSETUP AND HOLD TIMES3 V1.5 VtPZLOutputWaveform 1S1 at 7 V(see Note B)OutputWaveform 2S1 at Open(see Note B)tPZHtPLZ1.5 VtPHZVOH − 0.3 VVOH≈0 VVOLTAGE WAVEFORMSENABLE AND DISABLE TIMESLOW- AND HIGH-LEVEL ENABLING1.5 V0 Vth3 V1.5 V0 VOutputControl3.5 VVOL + 0.3 VVOL1.5 VNOTES:A.CL includes probe and jig capacitance.B.Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.Waveform2 is for an output with internal conditions such that the output is high, except when disabled by the output control.C.All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr ≤ 2.5 ns, tf≤ 2.5 ns.D.The outputs are measured one at a time, with one transition per measurement.Figure 1. Load Circuit and Voltage WaveformsPOST OFFICE BOX 655303 DALLAS, TEXAS 75265•5元器件交易网www.cecb2b.com

PACKAGEOPTIONADDENDUM

www.ti.com

26-Sep-2005

PACKAGINGINFORMATION

OrderableDevice5962-9450901Q3A5962-9450901QKA5962-9450901QLASN74ABT827DBLESN74ABT827DBRSN74ABT827DBRE4SN74ABT827DWSN74ABT827DWE4SN74ABT827DWRSN74ABT827DWRE4SN74ABT827NSRSN74ABT827NSRE4SN74ABT827NTSN74ABT827NTE4SN74ABT827PWSN74ABT827PWE4SN74ABT827PWLESN74ABT827PWRSN74ABT827PWRE4SNJ54ABT827FKSNJ54ABT827JTSNJ54ABT827W

(1)

Status(1)ACTIVEACTIVEACTIVEOBSOLETEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEOBSOLETEACTIVEACTIVEACTIVEACTIVEACTIVE

PackageTypeLCCCCFPCDIPSSOPSSOPSSOPSOICSOICSOICSOICSOSOPDIPPDIPTSSOPTSSOPTSSOPTSSOPTSSOPLCCCCDIPCFP

PackageDrawingFKWJTDBDBDBDWDWDWDWNSNSNTNTPWPWPWPWPWFKJTW

PinsPackageEcoPlan(2)

Qty28242424242424242424242424242424242424282424

111

TBDTBDTBDTBD

2000Green(RoHS&

noSb/Br)2000Green(RoHS&

noSb/Br)2525

Green(RoHS&noSb/Br)Green(RoHS&noSb/Br)

Lead/BallFinish

CallTICallTICallTICallTICUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCallTICUNIPDAUCUNIPDAUCallTICallTICallTI

MSLPeakTemp(3)Level-NC-NC-NCLevel-NC-NC-NCLevel-NC-NC-NCCallTI

Level-1-260C-UNLIMLevel-1-260C-UNLIMLevel-1-260C-UNLIMLevel-1-260C-UNLIMLevel-1-260C-UNLIMLevel-1-260C-UNLIMLevel-1-260C-UNLIMLevel-1-260C-UNLIMLevel-NC-NC-NCLevel-NC-NC-NCLevel-1-260C-UNLIMLevel-1-260C-UNLIMCallTI

Level-1-260C-UNLIMLevel-1-260C-UNLIMLevel-NC-NC-NCLevel-NC-NC-NCLevel-NC-NC-NC

2000Green(RoHS&

noSb/Br)2000Green(RoHS&

noSb/Br)2000Green(RoHS&

noSb/Br)2000Green(RoHS&

noSb/Br)15156060

Pb-Free(RoHS)Pb-Free(RoHS)Green(RoHS&noSb/Br)Green(RoHS&noSb/Br)

TBD

2000Green(RoHS&

noSb/Br)2000Green(RoHS&

noSb/Br)111

TBDTBDTBD

Themarketingstatusvaluesaredefinedasfollows:ACTIVE:Productdevicerecommendedfornewdesigns.

LIFEBUY:TIhasannouncedthatthedevicewillbediscontinued,andalifetime-buyperiodisineffect.

NRND:Notrecommendedfornewdesigns.Deviceisinproductiontosupportexistingcustomers,butTIdoesnotrecommendusingthispartinanewdesign.

PREVIEW:Devicehasbeenannouncedbutisnotinproduction.Samplesmayormaynotbeavailable.OBSOLETE:TIhasdiscontinuedtheproductionofthedevice.

(2)

EcoPlan-Theplannedeco-friendlyclassification:Pb-Free(RoHS)orGreen(RoHS&noSb/Br)-pleasecheckhttp://www.ti.com/productcontentforthelatestavailabilityinformationandadditionalproductcontentdetails.TBD:ThePb-Free/Greenconversionplanhasnotbeendefined.

Pb-Free(RoHS):TI'sterms\"Lead-Free\"or\"Pb-Free\"meansemiconductorproductsthatarecompatiblewiththecurrentRoHSrequirementsforall6substances,includingtherequirementthatleadnotexceed0.1%byweightinhomogeneousmaterials.Wheredesignedtobesoldered

Addendum-Page1

元器件交易网www.cecb2b.com

PACKAGEOPTIONADDENDUM

www.ti.com

26-Sep-2005

athightemperatures,TIPb-Freeproductsaresuitableforuseinspecifiedlead-freeprocesses.

Green(RoHS&noSb/Br):TIdefines\"Green\"tomeanPb-Free(RoHScompatible),andfreeofBromine(Br)andAntimony(Sb)basedflameretardants(BrorSbdonotexceed0.1%byweightinhomogeneousmaterial)

(3)

MSL,PeakTemp.--TheMoistureSensitivityLevelratingaccordingtotheJEDECindustrystandardclassifications,andpeaksoldertemperature.

ImportantInformationandDisclaimer:TheinformationprovidedonthispagerepresentsTI'sknowledgeandbeliefasofthedatethatitisprovided.TIbasesitsknowledgeandbeliefoninformationprovidedbythirdparties,andmakesnorepresentationorwarrantyastotheaccuracyofsuchinformation.Effortsareunderwaytobetterintegrateinformationfromthirdparties.TIhastakenandcontinuestotakereasonablestepstoproviderepresentativeandaccurateinformationbutmaynothaveconducteddestructivetestingorchemicalanalysisonincomingmaterialsandchemicals.TIandTIsuppliersconsidercertaininformationtobeproprietary,andthusCASnumbersandotherlimitedinformationmaynotbeavailableforrelease.

InnoeventshallTI'sliabilityarisingoutofsuchinformationexceedthetotalpurchasepriceoftheTIpart(s)atissueinthisdocumentsoldbyTItoCustomeronanannualbasis.

Addendum-Page2

元器件交易网www.cecb2b.com

MECHANICAL DATAMCER004A – JANUARY 1995 – REVISED JANUARY 1997JT (R-GDIP-T**)24 LEADS SHOWNCERAMIC DUAL-IN-LINEA2413DIMPINS **24 1.280(32,51) 1.240(31,50) 0.300(7,62) 0.245(6,22)28 1.460(37,08) 1.440(36,58) 0.291(7,39) 0.285(7,24)A MAXBA MINB MAX10.070 (1,78)0.030 (0,76)12B MIN0.100 (2,54) MAX0.015 (0,38) MIN0.320 (8,13)0.290 (7,37)0.200 (5,08) MAXSeating Plane0.130 (3,30) MIN0.023 (0,58)0.015 (0,38)0.100 (2,54)0.014 (0,36)0.008 (0,20)4040110/C 08/96NOTES:A.B.C.D.E.All linear dimensions are in inches (millimeters).This drawing is subject to change without notice.This package can be hermetically sealed with a ceramic lid using glass frit.Index point is provided on cap for terminal identification.Falls within MIL STD 1835 GDIP3-T24, GDIP4-T28, and JEDEC MO-058 AA, MO-058 AB0°–15°POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com

MECHANICAL DATA MCFP007 – OCTOBER 1994W (R-GDFP-F24) 0.375 (9,53)0.340 (8,64)CERAMIC DUAL FLATPACKBase and Seating Plane0.006 (0,15)0.004 (0,10)0.090 (2,29)0.045 (1,14)0.395 (10,03)0.360 (9,14)0.045 (1,14)0.026 (0,66)0.360 (9,14)0.240 (6,10)10.360 (9,14)0.240 (6,10)240.019 (0,48)0.015 (0,38)0.050 (1,27)0.640 (16,26)0.490 (12,45)0.030 (0,76)0.015 (0,38)1230° TYP1.115 (28,32)0.840 (21,34)134040180-5/B 03/95NOTES:A.B.C.D.E.All linear dimensions are in inches (millimeters).This drawing is subject to change without notice.This package can be hermetically sealed with a ceramic lid using glass frit.Falls within MIL-STD-1835 GDFP2-F24 and JEDEC MO-070ADIndex point is provided on cap for terminal identification only.POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com

MECHANICAL DATA MLCC006B – OCTOBER 1996FK (S-CQCC-N**) 28 TERMINAL SHOWNLEADLESS CERAMIC CHIP CARRIER18171615141312NO. OFTERMINALS**111028987668584445220AMIN0.342(8,69)0.442(11,23)0.640(16,26)0.739(18,78)0.938(23,83)1.141(28,99)MAX0.358(9,09)0.458(11,63)0.660(16,76)0.761(19,32)0.962(24,43)1.165(29,59)MIN0.307(7,80)0.406(10,31)0.495(12,58)0.495(12,58)0.850(21,6)1.047(26,6)BMAX0.358(9,09)0.458(11,63)0.560(14,22)0.560(14,22)0.858(21,8)1.063(27,0)192021B SQ22A SQ23242526272812340.080 (2,03)0.064 (1,63)0.020 (0,51)0.010 (0,25)0.020 (0,51)0.010 (0,25)0.055 (1,40)0.045 (1,14)0.045 (1,14)0.035 (0,89)0.028 (0,71)0.022 (0,54)0.050 (1,27)0.045 (1,14)0.035 (0,89)4040140/D 10/96NOTES:A.B.C.D.E.All linear dimensions are in inches (millimeters).This drawing is subject to change without notice.This package can be hermetically sealed with a metal lid.The terminals are gold plated.Falls within JEDEC MS-004POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com

MECHANICAL DATA MPDI004 – OCTOBER 1994NT (R-PDIP-T**) 24 PINS SHOWNPLASTIC DUAL-IN-LINE PACKAGEADIM2413PINS **241.260(32,04)1.230(31,24)0.310(7,87)0.290(7,37)281.425(36,20)1.385(35,18)0.315(8,00)0.295(7,49)A MAX0.280 (7,11)0.250 (6,35)A MINB MAX10.070 (1,78) MAX12B MIN0.020 (0,51) MINB0.200 (5,08) MAXSeating Plane0.125 (3,18) MIN0.100 (2,54)0.021 (0,53)0.015 (0,38)0.010 (0,25)M0.010 (0,25) NOM0°–15°4040050/B 04/95NOTES:A.All linear dimensions are in inches (millimeters).B.This drawing is subject to change without notice.POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com

元器件交易网www.cecb2b.com

元器件交易网www.cecb2b.com

MECHANICAL DATAMSSO002E – JANUARY 1995 – REVISED DECEMBER 2001DB (R-PDSO-G**) 28 PINS SHOWN0,65280,380,22150,15MPLASTIC SMALL-OUTLINE0,250,095,605,008,207,40Gage Plane1A140°–ā8°0,250,950,55Seating Plane2,00 MAX0,05 MIN0,10PINS **DIMA MAX146,50166,50207,50248,502810,503010,503812,90A MIN5,905,906,907,909,909,9012,304040065/E 12/01NOTES:A.B.C.D.All linear dimensions are in millimeters.This drawing is subject to change without notice.Body dimensions do not include mold flash or protrusion not to exceed 0,15.Falls within JEDEC MO-150POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com

MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 MECHANICAL DATA PW (R-PDSO-G**) 14 PINS SHOWNPLASTIC SMALL-OUTLINE PACKAGE0,651480,300,190,10M0,15 NOM4,504,306,606,20Gage Plane0,251A70°–8°0,750,50Seating Plane1,20 MAX0,150,050,10PINS **DIMA MAX83,10145,10165,10206,60247,90289,80A MIN2,904,904,906,407,709,604040064/F 01/97NOTES:A.B.C.D.All linear dimensions are in millimeters.This drawing is subject to change without notice.Body dimensions do not include mold flash or protrusion not to exceed 0,15.Falls within JEDEC MO-153POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvements, and other changes to its products and services at any time and to discontinueany product or service without notice. Customers should obtain the latest relevant information before placingorders and should verify that such information is current and complete. All products are sold subject to TI’s termsand conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TIdeems necessary to support this warranty. Except where mandated by government requirements, testing of allparameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible fortheir products and applications using TI components. To minimize the risks associated with customer productsand applications, customers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or processin which TI products or services are used. Information published by TI regarding third-party products or servicesdoes not constitute a license from TI to use such products or services or a warranty or endorsement thereof.Use of such information may require a license from a third party under the patents or other intellectual propertyof the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproductionof this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable forsuch altered documentation.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for thatproduct or service voids all express and any implied warranties for the associated TI product or service andis an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Following are URLs where you can obtain information on other Texas Instruments products and applicationsolutions:ProductsAmplifiersData ConvertersDSPInterfaceLogicPower MgmtMicrocontrollers

amplifier.ti.comdataconverter.ti.comdsp.ti.cominterface.ti.comlogic.ti.compower.ti.commicrocontroller.ti.com

ApplicationsAudioAutomotiveBroadbandDigital ControlMilitary

Optical NetworkingSecurityTelephonyVideo & ImagingWireless

Mailing Address:

Texas Instruments

Post Office Box 655303 Dallas, Texas 75265

Copyright  2005, Texas Instruments Incorporated

www.ti.com/audiowww.ti.com/automotivewww.ti.com/broadbandwww.ti.com/digitalcontrolwww.ti.com/militarywww.ti.com/opticalnetworkwww.ti.com/securitywww.ti.com/telephonywww.ti.com/videowww.ti.com/wireless